2024 Generac Power Systems Gaseous Industrial Generator, 150kW MG150_14_2

Information

2024 Generac Power Systems Gaseous Industrial Generator, 150kW MG150_14_2

150kW Gaseous Generator (14.2L)

As electrical grid outages become more common it is important to be prepared for the potential of a power outage. Keep all your business’s essentials up and running with Generac's 14.2L 150kW generator. Our rugged natural gas generators give you all the backup power you need, in less than 10 seconds, until grid power is restored. All of our industrial gas generators are completely cost-effective and give you the best value for the output so you can afford more of what you need for your business.

Features may include:

Generator Enclosure
  • Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
Spark-Ignited Engine
  • Generac builds its spark-ignited engines from the block up utilizing advanced engineering expertise.
Industrial Alternator
  • Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
POWERMANAGER® Controller
  • Generac engineers its generator controls with safety and convenience as top priorities.
Generator Paralleling
  • Generac's Modular Power Systems (MPS) boast a rate of up to 99.999% reliability, and are more cost-effective and flexible than single generators with the same load capacity.

Photos

Highlights

  • La Grange, Georgia
  • 2024
  • Generac Power Systems
  • Gaseous Industrial Generator, 150kW MG150_14_2
  • Piston Type: Aluminum | Crankshaft Type: Ductile Iron | Lifter Type: Solid
  • Natural Gas
  • Available

Specifications

  • 2024
  • Generac Power Systems
  • Gaseous Industrial Generator, 150kW
  • MG150_14_2
  • General
  • Piston Type: Aluminum | Crankshaft Type: Ductile Iron | Lifter Type: Solid
  • Generac
  • 6 | Cylinder Head: Cast Iron GT250, OHV | Cylinder Liners: Ductile Iron
  • In-line | Intake Air Method: Turbocharged/Aftercooled
  • 864.71 in3 (14.2 L)
  • 5.31 in (135 mm)
  • 6.50 in (165 mm)
  • 9.5:1
  • Electronic
  • Oil Pump Type: Gear Driven | Oil Filter Type: Full-Flow with Cartridge
  • Type : Pressurized Closed Recovery | Fan Type: Pusher
  • Natural Gas
  • Electronic | Frequency Regulation (Steady State): ±0.25%
  • Size: See Battery Index 0161970SBY | Voltage: (2) - 12 VDC | Ground Polarity: Negative
  • Alternator: 57.5 A
  • System Voltage: 24 VDC
  • Model: K0150124Y21 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% (3-Phase Only) | Telephone Interference Factor (TIF): <50 | Standard Excitation: Permanent Magnet | Bearings: Single Sealed Ball | Coupling: Direct via Flexible Disc | Voltage Regulator Type: Full Digital | Regulation Accuracy (Steady State): ±0.25%
  • Cooling: 1,894 RPM
  • Operating Fuel Pressure: 7-11 in H2O (1.7- 2.7 kPa)
  • 30 in (762 mm)
  • Crankcase Capacity: 36.2 qt (34.3 L)
  • Number of Main Bearings: 7 | Connecting Rods: Carbon Steel | Hardened Valve Seats: High Temp Steel Alloy
  • Intake Valve Material: Special Heat-Resistant Steel | Exhaust Valve Material: High Temp Steel Alloy
  • Down Draft